Mesenchymal stem cells derived-exosomes enhanced amniotic membrane extract promotes corneal keratocyte proliferation.

Amniotic membrane extract (AME) and Wharton's jelly mesenchymal stem cells derived-exosomes (WJ-MSC-Exos) are promising therapeutic solutions explored for their potential in tissue engineering and regenerative medicine, particularly in skin and corneal wound healing applications. AME is an extract form of human amniotic membrane and known to contain a plethora of cytokines and growth factors, making it a highly attractive option for topical applications. Similarly, WJ-MSC-Exos have garnered significant interest for their wound healing properties. Although WJ-MSC-Exos and AME have been used separately for wound healing research, their combined synergistic effects have not been studied extensively. In this study, we evaluated the effects of both AME and WJ-MSC-Exos, individually and together, on the proliferation of corneal keratocytes as well as their ability to promote in vitro cell migration, wound healing, and their impact on cellular morphology. Our findings indicated that the presence of both exosomes (3 × 105 Exo/mL) and AME (50 µg/mL) synergistically enhance the proliferation of corneal keratocytes. Combined use of these solutions (3 × 105 Exo/mL + 50 µg/mL) increased cell proliferation compared to only 50 µg/mL AME treatment on day 3 (**** p < 0.0001). This mixture treatment (3 × 105 Exo/mL + 50 µg/mL) increased wound closure rate compared to isolated WJ-MSC-Exo treatment (3 × 105 Exo/mL) (*p < 0.05). Overall, corneal keratocytes treated with AME and WJ-MSC-Exo (3 × 105 Exo/mL + 50 µg/mL) mixture resulted in enhanced proliferation and wound healing tendency. Utilization of combined use of AME and WJ-MSC-Exo can pave the way for a promising foundation for corneal repair research.

Cell adhesion molecule immobilized gold surfaces for enhanced neuron-electrode interfaces.

To provide a long-term solution for increasing the biocompatibility of neuroprosthetics, approaches to reduce the side effects of invasive neuro-implantable devices are still in need of improvement. Physical, chemical, and bioactive design aspects of the biomaterials are proven to be important for providing proper cell-to-cell, cell-to-material interactions. Particularly, modification of implant surfaces with bioactive cues, especially cell adhesion molecules (CAMs) that capitalize on native neural adhesion mechanisms, are promising candidates in favor of providing efficient interfaces. Within this concept, this study utilized specific CAMs, namely N-Cadherin (Neural cadherin, N-Cad) and neural cell adhesion molecule (NCAM), to enhance neuron-electrode contact by mimicking the cell-to-ECM interactions for improving the survival of cells and promoting neurite outgrowth. For this purpose, representative gold electrode surfaces were modified with N-Cadherin, NCAM, and the mixture (1:1) of these molecules. Modifications were characterized, and the effect of surface modification on both differentiated and undifferentiated neuroblastoma SH-SY5Y cell lines were compared. The findings demonstrated the successful modification of these molecules which subsequently exhibited biocompatible properties as evidenced by the cell viability results. In cell culture experiments, the CAMs displayed promising results in promoting neurite outgrowth compared to conventional poly-l-lysine coated surfaces, especially NCAM and N-Cad/NCAM modified surfaces clearly showed significant improvement. Overall, this optimized approach is expected to provide an insight into the action mechanisms of cells against the local environment and advance processes for the fabrication of alternative neural interfaces.

Development of photoreactive demineralized bone matrix 3D printing colloidal inks for bone tissue engineering.

Demineralized bone matrix (DBM) has been widely used clinically for dental, craniofacial and skeletal bone repair, as an osteoinductive and osteoconductive material. 3D printing (3DP) enables the creation of bone tissue engineering scaffolds with complex geometries and porosity. Photoreactive methacryloylated gelatin nanoparticles (GNP-MAs) 3DP inks have been developed, which display gel-like behavior for high print fidelity and are capable of post-printing photocrosslinking for control of scaffold swelling and degradation. Here, novel DBM nanoparticles (DBM-NPs, ∼400 nm) were fabricated and characterized prior to incorporation in 3DP inks. The objectives of this study were to determine how these DBM-NPs would influence the printability of composite colloidal 3DP inks, assess the impact of ultraviolet (UV) crosslinking on 3DP scaffold swelling and degradation and evaluate the osteogenic potential of DBM-NP-containing composite colloidal scaffolds. The addition of methacryloylated DBM-NPs (DBM-NP-MAs) to composite colloidal inks (100:0, 95:5 and 75:25 GNP-MA:DBM-NP-MA) did not significantly impact the rheological properties associated with printability, such as viscosity and shear recovery or photocrosslinking. UV crosslinking with a UV dosage of 3 J/cm2 directly impacted the rate of 3DP scaffold swelling for all GNP-MA:DBM-NP-MA ratios with an ∼40% greater increase in scaffold area and pore area in uncrosslinked versus photocrosslinked scaffolds over 21 days in phosphate-buffered saline (PBS). Likewise, degradation (hydrolytic and enzymatic) over 21 days for all DBM-NP-MA content groups was significantly decreased, ∼45% less in PBS and collagenase-containing PBS, in UV-crosslinked versus uncrosslinked groups. The incorporation of DBM-NP-MAs into scaffolds decreased mass loss compared to GNP-MA-only scaffolds during collagenase degradation. An in vitro osteogenic study with bone marrow-derived mesenchymal stem cells demonstrated osteoconductive properties of 3DP scaffolds for the DBM-NP-MA contents examined. The creation of photoreactive DBM-NP-MAs and their application in 3DP provide a platform for the development of ECM-derived colloidal materials and tailored control of biochemical cue presentation with broad tissue engineering applications.

A typical method for decellularization of plants as biomaterials.

Decellularization is a process by which cells are removed from tissues or organs, leaving behind the extracellular matrix (ECM) structure. This process has gained interest in the fields of tissue engineering and regenerative medicine as a way to prepare suitable scaffolds for tissue reconstruction. Although the initial efforts come with the animal tissues, this technique can also be applied to various plant tissues with simple modifications, as plant-derived biomaterials have the benefit of being biocompatible and serving as a safe, all-natural substitute for synthetic or animal originated materials. Additionally, plant-derived biomaterials may help cells grow and differentiate, creating a three-dimensional environment for tissue regeneration and repair. Here we demonstrate a general method for plant tissue decellularization, including already experienced approaches and techniques.•Exhibit the basic steps for plant decellularization, which may be applied to several other plant tissues.•The proposed approach may be optimized considering various intended uses.•Gives basic information for the determination of decellularization efficiency.

Emerging applications of 3D engineered constructs from plant seed extracts.

Seeds, by-products derived from various plants such as mango, quince, and apples, are considered waste, though they have emerging commercial potential, and have been used in biological, industrial, and physiological research. Seed-derived natural macromolecules- mainly polysaccharides, mucilage, gums, and cellulose-have physicochemical and structural diversification, giving the potential for forming gels, texturing, thickening, and providing interfacial adsorption. Seed-derived natural macromolecules have been widely used during the last few years in cell research and tissue engineering applications. Their widespread approachability and safety, high rate of biodegradability, biocompatibility, supporting cell proliferation, and extracellular matrix synthesis are the main properties making plant seed derivatives appropriate for use. The gel-forming ability of these derivatives gives them the capability of creating natural polymer-based scaffolds with the aptitude to resemble extracellular matrices (ECM). These ECM exhibit the high potential in scaffolds for tissue renewal. A deeper knowledge of the physicochemical characteristics of seed-derived mucilage and gum has been indicated as a key ingredient in several pharmaceutical preparations, but it has been remarkably utilized in nanomedicine for the last few years as a drug carrier for drug delivery, in gene therapy, and as scaffold components for tissue engineering purposes. Here, we afford up-to-date data about the different extracts from plant seeds-mainly mucilage and gum, we summarize the extraction techniques used to isolate these macromolecules, and we focus on their application in scaffold fabrication for tissue engineering purposes and regenerative medicine applications.

Multifunctional Silk Fibroin/Carbon Nanofiber Scaffolds for In Vitro Cardiomyogenic Differentiation of Induced Pluripotent Stem Cells and Energy Harvesting from Simulated Cardiac Motion.

In this proof-of-concept study, cardiomyogenic differentiation of induced pluripotent stem cells (iPSCs) is combined with energy harvesting from simulated cardiac motion in vitro. To achieve this, silk fibroin (SF)-based porous scaffolds are designed to mimic the mechanical and physical properties of cardiac tissue and used as triboelectric nanogenerator (TENG) electrodes. The load-carrying mechanism, ß-sheet content, degradation characteristics, and iPSC interactions of the scaffolds are observed to be interrelated and regulated by their pore architecture. The SF scaffolds with a pore size of 379 ± 34 µm, a porosity of 79 ± 1%, and a pore interconnectivity of 67 ± 1% upregulated the expression of cardiac-specific gene markers TNNT2 and NKX2.5 from iPSCs. Incorporating carbon nanofibers (CNFs) enhances the elastic modulus of the scaffolds to 45 ± 3 kPa and results in an electrical conductivity of 0.021 ± 0.006 S/cm. The SF and SF/CNF scaffolds are used as conjugate TENG electrodes and generate a maximum power output of 0.37 × 10-3 mW/m2, with an open-circuit voltage and a short circuit current of 0.46 V and 4.5 nA, respectively, under simulated cardiac motion. A novel approach is demonstrated for fabricating scaffold-based cardiac patches that can serve as tissue scaffolds and simultaneously allow energy harvesting.

Bone surface mimicked PDMS membranes stimulate osteoblasts and calcification of bone matrix.

Cellular microenvironments play a crucial role in cell behavior. In addition to the biochemical cues present in the microenvironments, biophysical and biomechanical properties on surfaces have an impact on cellular functionality and eventually cellular fate. Effects of surface topography on cell behavior are being studied extensively in the literature. However, these studies often try to replicate topographical features of tissue surfaces by using techniques such as chemical etching, photolithography, and electrospinning, which may result in the loss of crucial micro- and nano- features on the tissue surfaces such as bone. This study investigates the topographical effects of bone surface by transferring its surface features onto polydimethylsiloxane (PDMS) membranes using soft lithography from a bovine femur. Our results have shown that major features on bone surfaces were successfully transferred onto PDMS using soft lithography. Osteoblast proliferation and calcification of bone matrix have significantly increased along with osteoblast-specific differentiation and maturation markers such as osteocalcin (OSC), osterix (OSX), collagen type I alpha 1 chain (COL1A1), and alkaline phosphatase (ALP) on bone surface mimicked (BSM) PDMS membranes in addition to a unidirectional alignment of osteoblast cells compared to plain PDMS surfaces. This presented bone surface mimicking method can provide a versatile native-like platform for further investigation of intracellular pathways regarding osteoblast growth and differentiation.

Synthesis and characterization of stimuli-responsive hydrogels: evaluation of external stimuli influence on L929 fibroblast viability.

In this study, poly(2-hydroxyethyl methacrylate) [p(HEMA)] based hydrogels responsive to the pH, temperature and magnetic field were synthesized. The surface properties of p(HEMA) were improved by designing the stimuli-responsive hydrogels made of MAGA, NIPAAm and methacrylate-decorated magnetite nanoparticles as a function of pH-, thermo- and magnetic responsive cell culture surfaces. These materials were then modified an abundant extracellular matrix component, type I collagen, which has been considered as a biorecognition element to increase the applicability of hydrogels to cell viability. Based on results from scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA), stimuli-responsive hydrogel demonstrated improved non-porous structures and thermal stability with a high degree of cross-linking. Mechanical analyses of the hydrogels also showed that stimuli-responsive hydrogels are more elastomeric due to the polymeric chains and heterogeneous amorphous segments compared to plain hydrogels. Furthermore, surface modification of hydrogels with collagen provided better biocompatibility, which was confirmed with L929 fibroblast cell adhesion. Produced stimuli-responsive hydrogels modulated cellular viability by changing pH and magnetic field.

Biomimetic sharkskin surfaces with antibacterial, cytocompatible, and drug delivery properties.

Fighting with the infection is one of the most challenging and costly burdens of the healthcare system. Several types of antibiotics and antibacterial agents have been designed and used in combating this dilemma. Nevertheless, the overuse of drugs and the difficulties of proper delivery have led to the development of drug-resistance in many species of bacteria which has reduced the efficacy of antibiotics. Furthermore, localized delivery of these drugs can be more effective in eliminating biomaterial surface-associated infection compared to systemic administration. This type of infection occurs mostly by the formation of a bacterial biofilm layer on the surface of the implantable biomaterial which is the interface between the biomaterial and the tissue. Sharkskin topography is known for its antibacterial properties due to its unique pattern. Herein, antibacterial properties and drug release potentials of sharkskin mimicked chitosan membranes are investigated with the aim of studying the impact of this topography in reducing bacterial biofilm formation on drug-loaded polymeric membranes. Ampicillin sodium salt and caffeic acid phenethyl ester (CAPE) loaded chitosan (CH) membranes were fabricated. Gram-positive Staphylococcus aureus bacteria strain is used in antibacterial experiments, and human dermal fibroblast (HDFa) and keratinocyte (HaCaT) cells were used as model cell lines in cytocompatibility tests. Drug release, bacterial biofilm growth, and swelling ratio test results show the superiority of sharkskin topography in controlling the rate of drug release as well as considerably reducing bacterial biofilm formation. Furthermore, it was established that 2.5 mg mL-1 Amp content along with 500 µM CAPE yield in maximum antibacterial effect while not having cytotoxic effects on mammalian cells. Fabricated sharkskin mimicked drug-loaded membrane, which utilizes the combination of antibacterial compounds and antibacterial surface topography, also acts as an effective carrier for high concentrations of drugs.

Adsorption behavior of serum proteins on anodized titanium is driven by surface nanomorphology.

Protein adsorption behavior can play a critical role in defining the outcome of a material by affecting the subsequent in vivo response to it. To date, the effect of surface properties on protein adsorption behavior has been mainly focused on surface chemistry, but research on the effect of nanoscale surface topography remains limited. In this study, the adsorption behavior of human serum albumin, immunoglobulin G, and fibrinogen in terms of the adsorbed amount and conformational changes were investigated on bare and anodized titanium (Ti) samples (40 and 60 V applied voltages). While the surface chemistry, RMS surface roughness, and arithmetic surface roughness of the anodized samples were similar, they had distinctly different nanomorphologies identified by atomic force microscopy and scanning electron microscopy, and the surface statistical parameters, surface skewness Ssk and kurtosis Sku. The Feret pore size distribution was more uniform on the 60 V sample, and surface nanostructures were more symmetrical with higher peaks and deeper pores. On the other hand, the 40 V sample surface presented a nonuniform pore size distribution and asymmetrical surface nanostructures with lower peaks and shallower pores. The amount of surface-adsorbed protein increased on the sample surfaces in the order of Ti < 40 V < 60 V with the predominant factor affecting the amount of surface-adsorbed protein being the increased surface area attained by pore formation. The secondary structure of all adsorbed proteins deviated from that of their native counterparts. While comparing the secondary structure components of proteins on anodized surfaces, it was observed that all three proteins retained more of their secondary structure composition on the surface with more uniform and symmetrical nanofeatures than the surface having asymmetrical nanostructures. Our results suggest that the nanomorphology of the peaks and outer walls of the nanotubes can significantly influence the conformation of adsorbed serum proteins, even for surfaces having similar roughness values.

Designing of various biosensor devices for determination of apoptosis: A comprehensive review.

Apoptosis is a type of cell death caused by the occurrence of both pathological and physiological conditions triggered by ligation of death receptors outside the cell or triggered by DNA damage and/or cytoskeleton disruption. Timely monitoring of apoptosis can effectively help early diagnosis of related diseases and continuous assessment of the effectiveness of drugs. Detecting caspases, a protease family closely related to cellular apoptosis, and its identification as markers of apoptosis is a popular procedure. Biosensors are used for early diagnosis and play a very important role in preventing disease progression in various body sections. Recently, there has been a widespread increase in the desire to use materials made of paper (e.g. nitrocellulose membrane) for Point-of-Care (POC) testing systems since paper and paper-like materials are cheap, abundant and degradable. Microfluidic paper-based analytical devices (µPADs) are highly promising as they are cost-effective, easy to use, fast, precise and sustainable over time and under different environmental conditions. In this review, we focused our efforts on compiling the different approaches on identifying apoptosis pathway while giving brief information about apoptosis and biosensors. This review includes recent advantages in biosensing techniques to simply determine what happened in the cell life and which direction it would continue. As a conclusion, we believed that the review may help to researchers to compare/update the knowledge about diagnosis of the apoptosis pathway while reminding the basic definitions about the apoptosis and biosensor technologies.

Rose petal topography mimicked poly(dimethylsiloxane) substrates for enhanced corneal endothelial cell behavior.

Low proliferation capacity of corneal endothelial cells (CECs) and worldwide limitations in transplantable donor tissues reveal the critical need of a robust approach for in vitro CEC growth. However, preservation of CEC-specific phenotype with increased proliferation has been a great challenge. Here we offer a biomimetic cell substrate design, by optimizing mechanical, topographical and biochemical characteristics of materials with CEC microenvironment. We showed the surprising similarity between topographical features of white rose petals and corneal endothelium due to hexagonal cell shapes and physiologically relevant cell density (≈ 2000 cells/mm2). Polydimethylsiloxane (PDMS) substrates with replica of white rose petal topography and cornea-friendly Young's modulus (211.85 ± 74.9 kPa) were functionalized with two of the important corneal extracellular matrix (ECM) components, collagen IV (COL 4) and hyaluronic acid (HA). White rose petal patterned and COL 4 modified PDMS with optimized stiffness provided enhanced bovine CEC response with higher density monolayers and increased phenotypic marker expression. This biomimetic approach demonstrates a successful platform to improve in vitro cell substrate properties of PDMS for corneal applications, suggesting an alternative environment for CEC-based therapies, drug toxicity investigations, microfluidics and organ-on-chip applications.

Magnetic field-induced Ca2+ intake by mesenchymal stem cells is mediated by intracellular Zn2+ and accompanied by a Zn2+ influx.

Chronic exposure to magnetic fields (MFs) has a diverse range of effects on biological systems but definitive molecular mechanisms of the interaction remain largely unknown. One of the most frequently reported effects of MF exposure is an elevated concentration of intracellular Ca2+ through disputed pathways. Other prominent effects include increased oxidative stress and upregulation of neural markers through EGFR activation in stem cells. Further characterization of cascades triggered by MF exposure is hindered by the phenotype diversity of biological models used in the literature. In an attempt to reveal more mechanistic data in this field, we combined the most commonly used biological model and MF parameters with the most commonly reported effects of MFs. Based on clues from the pathways previously defined as sensitive to MFs (EGFR and Zn2+-binding enzymes), the roles of different types of channels (voltage gated Ca2+ channels, NMDA receptors, TRP channels) were inquired in the effects of 50 Hz MFs on bone marrow-derived mesenchymal stem cells. We report that, an influx of Zn2+ accompanies MF-induced Ca2+ intake, which is only attenuated by the broad-range inhibitor of TRP channels and store-operated Ca2+ entry (SOCE), 2-Aminoethoxydiphenyl borate (2-APB) among other blockers (memantine, nifedipine, ethosuximide and gabapentin). Interestingly, cation influx completely disappears when intracellular Zn2+ is chelated. Our results rule out voltage gated Ca2+ channels as a gateway to MF-induced Ca2+ intake and suggest Zn2+-related channels as a new focus in the field.

Impact of Poly(dimethylsiloxane) Surface Modification with Conventional and Amino Acid-Conjugated Self-Assembled Monolayers on the Differentiation of Induced Pluripotent Stem Cells into Cardiomyocytes.

Cardiomyocytes, differentiated from induced pluripotent stem cells (iPSCs), have the potential to produce patient- and disease-specific pharmacological and toxicological platforms, in addition to their cardiac cell therapy applications. However, the lack of both a robust and a simple procedure for scalable cell substrate production is one of the major limitations in this area. Mimicking the natural healthy myocardium extracellular matrix (ECM) properties by altering the cell substrate properties, such as stiffness and chemical/biochemical composition, can significantly affect cell substrate interfacial characteristics and potentially influence cellular behavior and differentiation of iPSCs to cardiomyocytes. Here, we propose a systematic and biomimetic approach, based on the preparation of poly(dimethylsiloxane) (PDMS) substrates having the similar stiffness as healthy heart tissue and a well-defined surface chemistry obtained by conventional [(3-aminopropyl)triethoxysilane (APTES) and octadecyltrimethoxysilane (OTS)] and amino acid (histidine and leucine)-conjugated self-assembled monolayers (SAMs). Among a wide range of different concentrations, the 50:1 prepolymer cross-linker ratio of PDMS allowed adaptation of the myocardium stiffness with a Young's modulus of 23.79 ± 0.61 kPa. Compared with conventional SAM modification, amino acid-conjugated SAMs greatly improved iPSC adhesion, viability, and cardiac marker expression by increasing surface biomimetic properties, whereas all SAMs enhanced cell behavior, with respect to native PDMS. Furthermore, leucine-conjugated SAM modification provided the best environment for cardiac differentiation of iPSCs. This optimized approach can be easily adapted for cardiac differentiation of iPSCs in vitro, rendering a very promising tool for microfluidics, drug screening, and organ-on-chip platforms.

Plant-Based Scaffolds in Tissue Engineering.

A wide range of platforms has been developed for 3D culture of cells in vitro to aggregate and align cells to resemble in vivo conditions in order to enhance communication between cells and promote differentiation. The cellulose skeleton of plant tissue can serve as an attainable scaffold for mammalian cells after decellularization, which is advantageous when compared to synthetic polymers or animal-derived scaffolds. Adjustable variables to modify the physical and biochemical properties of the resulting scaffolds include the protocol for the sodium dodecyl sulfate (SDS)-based decellularization procedure, surface coatings for cell attachment, plant type for decellularization, differentiation media, and integrity and shape of the substrate. These tunable cellulose platforms can host a wide range of mammalian cell types from muscle to bone cells, as well as malignancies. Here, fundamentals and applications of decellularized plant-based scaffolds are discussed. These biocompatible, naturally perfused, tunable, and easily prepared decellularized scaffolds may allow eco-friendly manufacturing frameworks for application in tissue engineering and organs-on-a-chip.

Effects of physicochemical properties of polyacrylamide (PAA) and (polydimethylsiloxane) PDMS on cardiac cell behavior.

In vitro cell culture is commonly applied in laboratories around the world. Cultured cells are either of primary origin or established cell lines. Such transformed cell lines are increasingly replaced by pluripotent stem cell derived organotypic cells with more physiological properties. The quality of the culture conditions and matrix environment is of considerable importance in this regard. In fact, mechanical cues of the extracellular matrix have substantial effects on the cellular physiology. This is especially true if contractile cells such as cardiomyocytes are cultured. Therefore, elastic biomaterials have been introduced as scaffolds in 2D and 3D culture models for different cell types, cardiac cells among them. In this review, key aspects of cell-matrix interaction are highlighted with focus on cardiomyocytes and chemical properties as well as strengths and potential pitfalls in using two commonly applied polymers for soft matrix engineering, polyacrylamide (PAA) and polydimethylsiloxane (PDMS) are discussed.

Bioinspired hydrogel surfaces to augment corneal endothelial cell monolayer formation.

Corneal endothelial cells (CECs) have limited proliferation ability leading to corneal endothelium (CE) dysfunction and eventually vision loss when cell number decreases below a critical level. Although transplantation is the main treatment method, donor shortage problem is a major bottleneck. The transplantation of in vitro developed endothelial cells with desirable density is a promising idea. Designing cell substrates that mimic the native CE microenvironment is a substantial step to achieve this goal. In the presented study, we prepared polyacrylamide (PA) cell substrates that have a microfabricated topography inspired by the dimensions of CECs. Hydrogel surfaces were prepared via two different designs with small and large patterns. Small patterned hydrogels have physiologically relevant hexagon densities (∼2000 hexagons/mm2 ), whereas large patterned hydrogels have sparsely populated hexagons (∼400 hexagons/mm2 ). These substrates have similar elastic modulus of native Descemet's membrane (DM; ∼50 kPa) and were modified with Collagen IV (Col IV) to have biochemical content similar to native DM. The behavior of bovine corneal endothelial cells on these substrates was investigated and results show that cell proliferation on small patterned substrates was significantly (p = 0.0004) higher than the large patterned substrates. Small patterned substrates enabled a more densely populated cell monolayer compared to other groups (p = 0.001 vs. flat and p < 0.0001 vs. large patterned substrates). These results suggest that generating bioinspired surface topographies augments the formation of CE monolayers with the desired cell density, addressing the in vitro development of CE layers.

Acoustic impedance measurement of tissue mimicking materials by using scanning acoustic microscopy.

Tissue-mimicking materials (TMMs) play a key role in the quality assurance of ultrasound diagnostic equipment and should have acoustic properties similar to human tissues. We propose a method to quantify the acoustic properties of TMM samples through the use of an 80 MHz Scanning Acoustic Microscopy (SAM), which provides micrometer resolution and fast data recording. We produced breast TMM samples in varying compositions that resulted in acoustic impedance values in the range of 1.373 ± 0.031 and 1.707 ± 0.036 MRayl. Additionally, liver TMM and blood mimicking fluid (BMF) samples were prepared that had acoustic impedance values of 1.693 ± 0.085 MRayl and 1.624 ± 0.006 MRayl, respectively. The characterization of the TMMs by SAM may provide reproducible and uniform acoustic reference data for tissue substitutes in a single-run microscopy experiment.

Development of electrically conductive porous silk fibroin/carbon nanofiber scaffolds.

Tissue engineering applications typically require three-dimensional scaffolds which provide the requisite surface area for cellular functions, while allowing transport of nutrients, waste and oxygen to and from the surrounding tissues. Scaffolds need to ensure sufficient mechanical properties to provide mechanically stable frameworks under physiologically relevant stress levels. Meanwhile, electrically conductive platforms are also desirable for the regeneration of specific tissues, where electrical impulses are transmitted throughout the tissue for proper physiological functioning. Towards this goal, carbon nanofibers (CNFs) were incorporated into silk fibroin (SF) scaffolds whose pore size and porosity were controlled during a salt leaching process. In our methodology, CNFs were dispersed in SF due to the hydrogen bond-forming ability of hexafluoro-2-propanol, a fluoroalcohol used as a solvent for SF. Results showed enhanced electrical conductivity and mechanical properties upon the incorporation of CNFs into the SF scaffolds, while the metabolic activities of cells cultured on SF/CNF nanocomposite scaffolds were significantly improved by optimizing the CNF content, porosity and pore size range of the scaffolds. Specifically, SF/CNF nanocomposite scaffolds with electrical conductivities as high as 0.023 S cm-1, tangent modulus values of 260 ± 30 kPa, a porosity as high as 78% and a pore size of 376 ± 53 µm were fabricated for the first time in the literature. Furthermore, an increase of about 34% in the wettability of SF was achieved by the incorporation of 10% CNF, which provided enhanced fibroblast spreading on scaffold surfaces.

Substrate stiffness effects on SH-SY5Y: The dichotomy of morphology and neuronal behavior.

Like many other cell types, neuroblastoma cells are also known to respond to mechanical cues in their microenvironment in vitro. They were shown to have mechanotransduction pathways, which result in enhanced neuronal morphology on stiff substrates. However, in previous studies, the differentiation process was monitored only by morphological parameters. Motivated by the lack of comprehensive studies that investigate the effects of mechanical cues on neuroblastoma differentiation, we used SH-SY5Y cells differentiated on polyacrylamide (PA) gels as a model. Cells differentiated on the surface of PA hydrogels with three different elastic moduli (0.1, 1, and 50 kPa) were morphologically evaluated and their electrophysiological responsiveness was probed using calcium imaging. Immunodetection of neural marker TUJ1 and p-FAK was used for biochemical characterization. Groups with defined stiffness that are matching and nonmatching to neural tissue extracellular matrix were used to distinguish biomimetic results from other effects. Results show that while cells display morphologies that do not resemble neurons on soft substrates, they are in fact electrophysiologically more responsive and abundant in neuronal marker TUJ1. Our findings suggest that while neuronal differentiation occurs more efficiently in microenvironments mechanically mimicking neural tissue, the SH-SY5Y model demonstrates morphologies that conflict with neuronal behavior under these conditions. These results are expected to contribute considerable input to researchers that use SH-SY5Y as a neuron model.